The home charge point we install.
Fox ESS L Series EV Charger, Installed
The home charge point we fit is the Fox ESS L Series L07PMC. It comes from the same manufacturer as the batteries and inverters we install, so solar, storage and car charging can be designed as one system.
Below are the manufacturer's published specifications, what Solar Linkage and Dynamic Load Balance do, and what we check before fitting.
Specifications
The L07PMC is a single-phase home charger.
- 7.3 kW, 32 A
- 5 metre tethered cable, with a 6 metre option
- IP55 and IK08 rated
- Operating range -25°C to 50°C
- 197 x 196 x 105 mm
- Mifare RFID access
- OCPP 1.6 JSON and 2.0.1
- Solar Linkage and Dynamic Load Balance
Solar Linkage
Solar Linkage lets the charger work with your solar generation, so surplus electricity can go into your car rather than out to the grid. How much of your driving it covers depends on your roof, the season and when the car is at home.
Exact behaviour depends on the combination of equipment fitted, which we confirm when designing your system.
Dynamic Load Balance
Dynamic Load Balance lets the charger reduce its output when the rest of the house is drawing heavily, helping keep the total within the capacity of your supply. It is one reason we check the incoming supply and consumer unit before installation.
Tethered or untethered
The L Series is tethered, with the cable permanently attached. That suits a private driveway where the car parks close to the charger. If the charger would sit further from the car, the 6 metre cable option or a different location may be better, and we discuss this at the survey.
Planning
From 21 October 2026, SI 2026/1056 extends permitted development for EV charge points in England beyond off-street parking. Limits include a maximum height of 1.6 metres, a maximum projection of 0.2 metres from a wall, 1.5 metres of footway clearance, one outlet per curtilage and a maximum volume of 0.2 cubic metres. Conservation areas are excluded from the new route.
Our EV charger planning guide covers the detail.
Installation
We check your supply, consumer unit, cable route and charger location, then install and commission the charger and register the manufacturer warranty in your name. The installation is protected by an insurance-backed guarantee.
At your free home survey we check the roof, the electrical installation and the planning position for your property before proposing a system.
Why homeowners choose Cozy Home Solutions
Cozy Home Solutions Ltd is an MCS certified installer of solar panels, battery storage and home EV chargers, based at Unit 2, Old Station Yard, Watlington Road, Cowley, Oxford, and working with homeowners across England and Wales. We are registered with NAPIT, HIES and EPVS, and we are a Hometree partner.
Every installation starts with a free home survey and a written quotation. When the work is finished, your system is commissioned and handed over with its MCS certificate, the DNO notification and the manufacturer warranties registered in your name. Battery cover runs to 10 years, and the installation itself is protected by an insurance-backed guarantee.
- Free home survey before any proposal
- DMEGC solar panels, Fox ESS batteries and Fox ESS EV chargers
- MCS certificate, DNO notification and warranties in your name
- Call 0800 688 9666, Monday to Friday, 9:00 to 19:00
Frequently asked questions
How powerful is the Fox ESS L Series charger?
The L07PMC is rated at 7.3 kW and 32 A on a single-phase supply.
How long is the cable?
It has a 5 metre tethered cable, with a 6 metre option.
Can the Fox ESS charger use my solar panels?
Yes. Solar Linkage lets the charger use surplus solar generation. How much depends on your roof, the season and when the car is at home.
Does it need a supply upgrade?
Not always. Dynamic Load Balance reduces charging when the house is drawing heavily, and we check your supply and consumer unit at the survey.
Is the charger weatherproof?
It is rated IP55 and IK08, with an operating range of -25°C to 50°C.